WoodFlow
HUEN
Request a quote

Butt-weld fittings

We supply butt-weld fittings in carbon, elevated-temperature, low-temperature, high-yield, stainless and duplex steel and nickel alloys, in more than a hundred grades and tens of thousands of sizes. The range covers elbows, equal and reducing tees, concentric and eccentric reducers, caps and special fittings to drawing, to EN 10253-2 / -3 / -4, ASME B16.9 and DIN 2605 / 2615 – 2617. Heavy-wall and large-diameter fittings are also available.

  • Sourced direct from manufacturers
  • No minimum order quantity
  • The complete package in one quote

Material and standards

Standards
EN 10253-2/-3/-4 · ASME B16.9 · ASTM A815 · DIN 2605/2615–2617
Material grades
P235GH · P265GH · WPB · WP11/22/91 · WPHY 52 · 1.4301 · 1.4404 · 1.4571 · duplex

Overview

  • Fittings: elbows (90°, 45°, 1D – 5D), equal and reducing tees, concentric and eccentric reducers, caps, and special fittings to drawing.
  • Standards: EN 10253-2 / -3 / -4, ASME B16.9 and DIN 2605 / 2615 – 2617.

Match the fitting to the pipe

Fitting and pipe should match in:

  • material group (same or equivalent);
  • wall thickness at the weld bevel;
  • standard system.

EN 10253-2 defines two types:

  • Type A: wall equal to the pipe, rated with a pressure-reduction factor;
  • Type B: designed for full pressure, with a heavier wall where needed.

The design decides which one applies.

Material range

  • Carbon and elevated-temperature: P235GH, P265GH, 16Mo3, 13CrMo4-5, P355QH1; ASTM A234 WPB, WPC, WP11, WP22, WP91.
  • Low temperature: P355NL1, ASTM A420 WPL6.
  • High-yield pipeline fittings: ASTM A860 WPHY 42 – 70.
  • Stainless: EN 10253-3 / -4 and ASTM A403 WP304 – WP316Ti.
  • Duplex: ASTM A815.

Heavy-wall and large-diameter fittings are also available.

What to include in your RFQ:

  • type and angle;
  • radius;
  • OD × wall (both sizes for reducers and tees);
  • grade;
  • standard and Type A/B;
  • certificate.

Frequently asked questions

What is a 3D elbow?

The centreline radius is three times the nominal pipe diameter. It gives a gentler change of direction than 1.5D.

Do you make fittings to drawing?

Yes, we also supply special fittings made to drawings.

Size table

DNNPSOD (mm)ElbowTeeReducerCap
DN10⅜"17,21,6–21,62–
DN15½"21,31,5–4,781,5–4,7821,5–4,78
DN20¾"26,91,5–5,561,5–5,561,5–5,561,5–5,56
DN251"33,71,5–6,351,5–6,351,5–6,351,5–6,35
DN321¼"42,41,5–6,351,5–6,351,5–6,351,5–6,35
DN401½"48,31,5–7,141,5–7,141,5–7,141,5–7,14
DN502"60,31,5–8,741,5–8,741,5–8,741,5–8,74
DN652½"76,11,5–7,11,5–7,11,5–51,5–7,1
DN803"88,91,5–11,131,5–11,131,5–11,131,5–11,13
DN1004"114,32–13,492–13,492–13,492–13,49
DN1255"139,72–15,882–15,882–15,882–15,88
DN1506"168,32–18,262–18,262–18,262–18,26
DN2008"219,12–23,012–23,012–23,012–23,01
DN25010"2732–28,582–28,582–28,582–28,58
DN30012"323,92–33,322–33,322–33,322–33,32
DN35014"355,62,6–35,712,6–35,712,6–35,712,6–35,71
DN40016"406,42,6–40,492,6–40,492,6–40,492,6–40,49
DN45018"4573–45,243–45,243–45,243–45,24
DN50020"5083–50,013–50,013–50,013–50,01
DN60024"6103–59,543–59,543–59,543–59,54
DN70028"7114–12,74–12,74–12,74–12,7
DN80032"8134–12,74–12,74–12,74–12,7
DN90036"9144–14,24–14,24–14,24–14,2
DN100040"10164–14,24–14,24–14,24–14,2
DN120048"12199,53–12,79,53–12,79,53–12,79,53–12,7

Typically available from stock. Other sizes on request.

Listed items show the typical range; we also quote custom specifications.

Send us your material list – one quote for the complete package (pipe, fittings, flanges, gaskets, bolting), sourced direct from manufacturers, no minimum order.

Request a quote